CENTRIFUGAL BLAST WHEEL
WHEEL:
The direct drive bi-directional 14" or 15" blast wheel revolves at 3600 RPM for maximum abrasive velocity. Balanced wheel components assure smooth operation.
BLADES:
Unique Rim-Loc design ensures easy replacement of long life, abrasive resistant, alloy blades.
CONTROL CAGE:
Dial Type Cage
WHEEL HOUSING:
Fabricated from 1/4" steel plate. Housing is completely lined with cast alloy steel liners. All liners are replaceable.
CABINET CONSTRUCTION
CABINET:
Low profile, formed to maintain structural integrity, the cabinet is fabricated from 1/4" steel plate. Access holes in sides of cabinet simplify belt replacement, and rear access door permits easy removal of tramp metal from screens.
DOOR:
Pneumatically operated reinforced rubber door provides full access to blast chamber. Door is positively sealed from abrasive and dust leakage. |
MILL CONSTRUCTION
CONVEYOR:
Continuous molded rubber tumble belt is 4-ply construction with 1/4" diameter abrasive drain holes. Rubber tumbling ridges are molded directly onto the belt. Screw adjusted take-ups provide positive belt adjustment.
CONVEYOR ROLLERS:
Rollers have 1 7/16" diameter shafts. All rollers are mounted to the cabinet with standard (4) bolt flange bearings.
CONVEYOR SPEED:
14 feet per minute.
CAPACITY:
31" x 24" diameter mill will handle 3 cubic feet or 400 pounds.
WORK LOAD HEIGHT:
42"
ABRASIVE RECYCLING SYSTEM
ELEVATOR:
Centrifugal discharge belt and bucket elevator is dust-tight. Removable cover permits service and inspection. Unique lip separator that filters the abrasive by eliminating light contaminants and unusable abrasive. Screw adjusted take-ups provide positive belt adjustment.
ABRASIVE SCREENING:
Abrasive screening in cabinet eliminates tramp metal from
entering blast wheel.
ABRASIVE CONTROL:
Totally enclosed, fully adjustable butterfly valve, quietly and precisely controls abrasive flow.
ABRASIVE REQUIRED:
400 pounds initial. |
VENTILATION REQUIREMENT
DUST COLLECTOR:
800 CFM, self contained, self cleaning, 6 cartridge dust collector
ELECTRICAL COMPONENTS
NEMA:
Type 12 electrical enclosure, optional 230/460 volt, 3 phase operation, thermal overload protection for all motors, ammeter, and oil tight push button controls. Timer controls abrasive flow and blast wheel motor.
AIR REQUIREMENT:
90-110 PSI required to operate abrasive valve, door, and optional dust collector automatic blow down.
ELECTRIC MOTORS:
All motors are totally enclosed fan cooled to provide maximum life.
Blast Motor 10HP/3600RPM
Mill Drive 1/2HP/1800RPM
Elevator Drive 3/4HP/1800RPM
SAFETY FEATURES:
Blast wheel operational only when door is closed. Chain drive is fully guarded.
NOISE LEVEL:
Less than 80 DB
SHIPPING WEIGHT:
2500 pounds
DIMENSIONS:
Width: 57 1/2"
Depth: 57 1/4"
Height: 106" |
